Garmin G1000 Nxi System Maintenance Manual page 69

Software Files
Software files are defined by part number and version number on the General Arrangement
drawing. Each G1000 system LRU reports the software version it currently contains to the user
in two places.
•
Normal System Mode: The Aux – System Status page lists each LRU and the
reported software version.
•
Configuration Mode: The System Status page (System page group) reports more
detailed LRU information, including software version, part number, and LRU status.
Software files are loaded to LRUs from the PFD1 System Upload page in configuration mode.
Configuration File Descriptions
There are configuration files for baseline settings and various options. Configuration files
contain preset selections for input/output channels, aircraft-specific settings, and LRU-specific
settings.
Certain software and configuration files are REQUIRED to be re-loaded
during maintenance that involves removal and replacement of G1000
equipment.
Refer to Section 7 for re-configuration requirements for each individual
G1000 LRU. Pay special attention to the selection of option files for the units
to assure a complete load.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
IMPORTANT!
Page 56
Revision 1