Garmin G1000 Nxi System Maintenance Manual page 286

07) Connext – SXM (For GIA 1 replacement and aircraft equipped with a
standalone GSR 56 only)
1. Scroll the curser to the Group window and select 07) Connext – SXM.
2. Press the ENT key.
3. In the ITEM window highlight the installed standalone GSR 56 configuration and press
the ENT key on PFD1.
4. Press the CLR ALL softkey.
5. Scroll the curser to GIA1 configuration box and press the ENT key to check the box.
6. Press "Load" softkey.
7. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete............."COMPLETE" in the summary box.
8. Acknowledge the prompt by pushing the ENT key.
08) Radar (For GIA 2 replacement and aircraft equipped with a Garmin
GRA 5500 radar altimeter only)
1. Scroll the curser to the Group window and select 08) Radar.
2. Press the ENT key.
3. In the ITEM window highlight King Air - GRA 5500 Radar Altimeter and press the ENT
key on PFD1.
4. Press the CLR ALL softkey.
5. Scroll the curser to GIA 2 configuration box, and press the ENT key to check the box.
6. Press "Load" softkey.
7. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete............."COMPLETE" in the summary box.
8. Acknowledge the prompt by pushing the ENT key.
11) Non Garmin Options (For GIA 2 replacement and aircraft equipped
with a ADF only)
1. Scroll the curser to the Group window and select 11) Non-Garmin options.
2. Press the ENT key.
3. In the ITEM window highlight King Air – ADF Option and press the ENT key on PFD1.
4. Press the CLR ALL softkey.
5. Scroll the curser to GIA 2 configuration box, and press the ENT key to check the box.
6. Press "Load" softkey.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Page 273
Revision 1