Garmin G1000 Nxi System Maintenance Manual page 211

GIA Configuration Alerts
Failure Message
MANIFEST – GIA1 software
mismatch. Communication
Halted.
MANIFEST – GIA2 software
mismatch. Communication
Halted.
GIA1 CONFIG – GIA1 audio
config error. Config service req'd.
GIA2 CONFIG – GIA2 audio
config error. Config service req'd.
GIA1 CONFIG – GIA1
configuration error. Config service
req'd.
GIA2 CONFIG – GIA2
configuration error. Config service
req'd.
GIA1 SERVICE – GIA1 needs
service. Return unit for repair.
GIA2 SERVICE – GIA2 needs
service. Return unit for repair.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Cause
The system has detected an
incorrect software version loaded
in GIA1.
The system has detected an
incorrect software version loaded
in GIA2.
The GIA's audio configuration files
are incorrect or missing.
The system has detected a GIA
configuration mismatch. If GIAs
are not properly configured after
being swapped/replaced, this
message appears.
The G1000 has detected a failure
in the specified GIA.
Solution
Load the correct software. See Section
7.3 for the Software Loading procedure.
Reload audio configuration files.
•
Load the configuration files for that
GIA. See Section 7.3 3.8for GIA 63
Configuration Loading procedure.
•
If problem persists, replace master
configuration module, check config
module harness for faults and
replace if necessary.
NOTE
•
New Terrain/Obstacle cards,
Jeppesen Aviation Database and
other optional features (i.e. TAWS
unlock card) will need to be replaced
if the master configuration module is
changed. The G1000 System ID
number will change to a new
number when installing a new
master config module. The old
Terrain and other databases will no
longer work as they will remain
locked to the old System ID number.
•
Replace GIA unit.
•
Return unit to an Authorized Repair
Facility for service.
Page 198
Revision 1