Figure 6-3, Configuration Module Installation; Table 6-1, Configuration Module Kit - 011-00979-00 - Garmin G1000 Nxi System Maintenance Manual

Table 6-1, Configuration Module Kit – 011-00979-00
Item
Configuration Module PCB Board Assembly w/EEPROM & Temp
1
Sensor
2 Spacer, Config Module
3 Cable, 4-Conductor Harness
4 Pins, #22 AWG (HD)
Removal:
1. Disconnect connector from LRU.
2. Remove 2 screws (8) from cover (7) and remove cover.
3. Unplug connector from configuration module (1).
4. Remove configuration module.
Installation:
1. Inspect connector for damaged pins (4).
2. Place configuration module (1) in position.
3. Insert connector into configuration module (1).
4. Assembly of the connector is the reverse of disassembly.
5. Checkout per Section 6.17.4.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1

Figure 6-3, Configuration Module Installation

Description
Garmin Part
Qty Needed
Number
1
012-00605-00 or -02
1 213-00043-00
1 325-00122-00
5 336-00021-00
Page 240
Revision 1