Interface Confirmation; Figure 3-13, Stormscope Configuration Page; Figure 3-14, Stormscope Configuration - Garmin G1000 Nxi System Maintenance Manual

Hide thumbs Also See for G1000 Nxi:

Table of Contents

Interface Confirmation

Lightning System Configuration Load Confirmation

Coordinate the StormScope configuration with Section 8.2 "Stormscope Functional Check".

1. With PFD1 in configuration mode, use the PFD1 large FMS knob to select OTHER and

the Stormscope configuration page.

2. Activate the cursor to highlight the DATA field. Use the small FMS knob to open the drop

down menu then select 'Config' and press ENT key on the PFD1.

G1000 NXi System Maintenance Manual

King Air 300 Series

190-00716-N1

Show Quick Links

Table of Contents