Figure 7-3, Normal Engine Instrument Markings (Mfd) - Garmin G1000 Nxi System Maintenance Manual

GEA 71 Test
On the MFD (normal mode), check the indication for each of the sensor or monitor inputs with
the aircraft engines off.
In general, verify all engine and system instruments show valid static normal values and
markings, with no red Xs or erratic indications. Reference Figure 7-3 for normal engine
instrument markings (figure may not reflect actual aircraft installation). If individual engine
readings do not appear normal or have a red-X over them, go to Section 7.4.4 for individual
instrument tests.

Figure 7-3, Normal Engine Instrument Markings (MFD)

If no other service is to be performed and individual GEA input testing is not required, continue
to the return-to-service checks in Section 9.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Page 283
Revision 1