Rvsm Checks; Figure 8-1, Low Speed Awareness Band Symbolization - Garmin G1000 Nxi System Maintenance Manual

Figure 8-1, Low Speed Awareness Band Symbolization

RVSM Checks

The following are required initial and continued airworthiness checks to verify proper
configuration for operation in RVSM airspace. RVSM operations are prohibited until the all of
the RVSM checks are completed successfully. Any changes to the aircraft external
configuration, such as the installation of additional antennas, probes, fairings or radomes along
the sides of the airplane, that may impact the air data system or aircraft performance may also
invalidate the RVSM certification for this aircraft.
RVSM Required Avionics Check
With the PFD in configuration mode, select the Aux – System Status page using the small
FMS knob. Press the small FMS knob to activate the cursor. Highlight each of the following
items in the LRU window and verify that the required software part number and version matches
the information in the General Arrangement drawing listed in Table 1-1. Verify hardware part
number by visual inspection of the units. Record the results in Table 8-1 (next page).
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Page 353
Revision 1