Figure 8-9, Gsr56 Configuration Page; Figure 8-10, Aux-Telephone Page - Garmin G1000 Nxi System Maintenance Manual

4. Restart the G1000 System in Normal Mode.
5. Using the large FMS knob, select the Aux page group on the MFD. Using the small FMS
knob, select the Aux-Telephone page.
6. Ensure the system is showing Iridium signal strength (best if aircraft is outside).
7. Press TEL button on the pilot's GMA.
8. Press the Dial softkey on the MFD.
9. Enter the test phone number in the ENTER PHONE NUMBER field using the GCU
keypad.
10. Press the ENT key on the GCU keypad to accept the phone number.
11. Press the ENT key on the GCU keypad to initiate the dialing sequence.
12. When call is complete, press the Hangup softkey on the Aux-Telephone page on the
MFD to end the call.
13. If no other service is to be performed, continue to the return-to-service checks in Section
9.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1

Figure 8-9, GSR56 Configuration Page

Figure 8-10, Aux-Telephone page

Page 370
Revision 1