Garmin G1000 Nxi System Maintenance Manual page 294

Legacy Replacement Procedure GEA1 or GEA2 (Alternate Method)
To load the GEA complete the following subsections in order as they apply to the aircraft.
01) Baseline (For GEA 1 or GEA 2 replacement)
1. Insert the software loader card in the top slot of PFD1.
2. Power on PFD2, MFD, and PFD1 in configuration mode.
3. Select NO when "Do you want to update system files" is displayed on the screen of
PFD1.
4. Select the "SYSTEM UPLOAD" page using the small FMS knob on PFD1.
5. Activate the cursor and rotate the small FMS knob to display the drop down menu.
Rotate the large FMS knob to highlight "01) Baseline" and press ENT key on PFD1.
6. Rotate the small FMS knob to display the drop down menu. Rotate the large FMS knob
to highlight King Air 200-300-Series Baseline Load Press ENT key on PFD1.
7. Press the CLR ALL softkey.
8. Use the large FMS knob to scroll to GEA 1 or GEA 2 whichever was replaced.
9. Highlight the software box and press the ENT key to check the box.
10. Highlight the Configuration box and press the ENT key to check the box.
11. Press "Load" softkey.
12. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete............."COMPLETE" in the summary box.
13. Acknowledge the prompt by pushing the ENT key.
03) 300 Series Engine-Prop (For GEA 1 or GEA 2 replacement)
1. Scroll the curser to the Group window and select "03) 300 Series Engine-Prop".
2. Press the ENT key.
3. In the ITEM window highlight the aircraft's engine and prop combination and press the
ENT key on PFD1.
4. Press the CLR ALL softkey.
5. Scroll the curser to GEA1 or GEA 2 configuration box, whichever was replaced, and
press the ENT key to check the box.
6. Press "Load" softkey.
7. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete............."COMPLETE" in the summary box.
8. Acknowledge the prompt by pushing the ENT key.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Page 281
Revision 1