Garmin G1000 Nxi System Maintenance Manual page 120

Item
Configuration Module
Replacement (Qty 5)
GEA 71 Backshell
Thermocouple (Qty 2)
GTP 59 OAT Probe
(Qty 2)
PFD, MFD, and GIA
Cooling Fans (Qty 5)
Annunciator/Switch –
Emergency
Frequency
Electrical Bonding
Test
Lightning Strike to
GTP 59 OAT Probe
or Antenna -
Actual or Suspected
Lightning Strike to the
Aircraft
ITT Thermocouple
Cable (Qty 2)
Oil Pressure Sensor
(Qty 2)
Oil Temperature
Sensor (Qty 2)
Torque Transmitter
(Qty 2)
Fuel Flow Transmitter
(Qty 2)
Prop Tachometer
(Qty 2)
Engine Speed
Tachometer (Qty 2)
Signal Conditioner
(Qty 2)
Annunciator/Switch –
Prop Sync
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Description/Procedure
G1000 Accessories
Removal & Replacement.
Removal & Replacement.
Removal & Replacement.
Removal & Replacement
Refer to Master Drawing List, listed in Table
1-1, for installation drawings.
Removal & Replacement.
G1000 Lightning Protection
Perform the Phase 3 electrical bonding
resistance check of G1000 equipment.
Perform the Phase 4 electrical bonding
resistance check of G1000 equipment.
Inspect the antenna/probe and surrounding
installation per
4-9
Table .
Inspect the GIA cooling fan discrete output
to the GIA.
Engine/Airframe Sensors
Removal & Replacement:
Refer to King Air 300 Series Maintenance
Manual listed in Table 1-1.
Removal & Replacement
Manual
Section No.
6.17
6.18
6.8
On Condition
N/A
6.25
4.5.3
4.5.4
4.4 On Condition
4.4
(
On Condition
4-9
Table )
N/A On Condition
6.23
On Condition
6.24
Interval
Phase 3
Phase 4
Page 107
Revision 1