Garmin G1000 Nxi System Maintenance Manual page 288

5. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete............."COMPLETE" in the summary box.
6. Acknowledge the prompt by pushing the ENT key.
Non Garmin Options (For GIA 2 replacement and aircraft equipped with
a non-Garmin traffic system only)
1. Scroll the curser to the ITEM window highlight King Air – Traffic System Option (429
Interface) and press the ENT key on PFD1.
2. Press the CHK ALL softkey.
3. Press "Load" softkey.
4. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete............."COMPLETE" in the summary box.
5. Acknowledge the prompt by pushing the ENT key.
Non Garmin Options (For GIA 2 replacement and aircraft equipped with
a lightning detection system only)
1. Scroll the curser to the ITEM window highlight King Air – Lightning System Option and
press the ENT key on PFD1.
2. Press the CHK ALL softkey.
3. Press "Load" softkey.
4. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete............."COMPLETE" in the summary box.
5. Acknowledge the prompt by pushing the ENT key.
Enhanced AFCS Feature Enablement (For GIA 1 or GIA 2 replacement
and aircraft equipped with Enhanced AFCS only)
1. Open PFD1 PRI and SEC circuit breakers.
2. Insert Enhanced AFCS feature enablement card (010-00330-55).
3. While holding in the #12 softkey or ENT key on PFD1, close PFD 1 PRI and SEC circuit
breakers.
4. Select the "SYSTEM UPLOAD" page.
5. Activate the cursor and select Enhanced AFCS in the group window and press ENT key
on PFD1.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Page 275
Revision 1