Garmin G1000 Nxi System Maintenance Manual page 91

Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration column for each item loaded.
•
"Upload Complete.............COMPLETE" in the summary box.
Press the ENT key to acknowledge the "Upload Complete" box.
Open PFD1 circuit breaker and remove the Turbulence Detection enablement card.
GWX 70 Ground Clutter Suppression Feature Enablement
Follow this procedure to enable the GWX 70 Ground Clutter Suppression feature.
Insert the GWX 70 Ground Clutter Suppression Enablement card in the top slot of PFD1
and power on PFD1 in configuration mode.
On PFD1, select the "System Upload" page using the small FMS knob.
Push in the FMS knob to activate the curser in the Group field. Rotate the small FMS
knob to highlight "Enable_GCS" and press the ENT key to select it.
In the ITEM window, rotate the small FMS knob to highlight "GWX 70 Ground Clutter
Suppression Enable" and press the ENT key to select it.
Press the Load softkey.
Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration column for each item loaded.
•
"Upload Complete.............COMPLETE" in the summary box.
Press the ENT key to acknowledge the "Upload Complete" box.
Open PFD1 circuit breaker and remove the Ground Clutter Suppression enablement
card.
TAWS-B Feature Enablement
Follow this procedure to enable the TAWS Class B feature. If TAWS-A is required instead, go
to Section 3.9.7.
Insert the TAWS-B Enablement card in the top slot of PFD1 and power on PFD1 in
configuration mode.
On PFD1, select the "System Upload" page using the small FMS knob.
Push in the FMS knob to activate the curser in the Group field. Rotate the small FMS
knob to highlight "Configuration Files" and press the ENT key to select it.
In the ITEM window, rotate the small FMS knob to highlight "Enable TAWS-B" and
press the ENT key to select it.
Press the Load softkey.
Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration column for each item loaded.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Page 78
Revision 1