Garmin G1000 Nxi System Maintenance Manual page 110

27. Set the seven dimming points below by setting the point at the bottom of the scale and
counting the number of clicks up from 0. The active point that can be adjusted is colored
yellow. To move to the next point to change, press the control knob.
28. In the CONFIGURE DIMMING menu, select EXIT.
29. In the CONFIGURE MENU, select CONFIGURE DISPLAY.
30. Select ROLL DISPLAY.
31. Select FIXED POINTER.
32. In the CONFIGURE DISPLAY menu, select AIRSPEED MINIMUM.
33. Select 40 KNOTS.
34. In the CONFIGURE DISPLAY menu, select DISPLAY ORIENTATION.
35. Select VERTICAL RIGHT.
36. In the CONFIGURE DISPLAY menu, select HORIZON DISPLAY.
37. Select SHADED.
38. In the CONFIGURE DISPLAY menu, select EXIT.
39. In the CONFIGURE MENU, select CONFIGURE HEADING.
40. Select DISPLAY OFF.
41. In the CONFIGURE MENU, select ACCEPT CHANGES.
After selecting ACCEPT CHANGES, the unit will automatically reset and
enter Flight Mode.
42. Press and hold the control knob until the OPTIONS MENU appears.
43. Select INFO >.
44. Select REVIEW CFG.
45. Scroll down to the DIMMING CURVE section and confirm the lighting values entered in
Step 27. If any values are incorrect, reenter the dimming curve configuration to correct.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Point 1
Point 2
Point 3
Point 4 100 (top of scale)
Point 5 100 (top of scale)
Point 6 100 (top of scale)
Point 7
NOTE
1
5
35
2
Page 97
Revision 1