Garmin G1000 Nxi System Maintenance Manual page 287

7. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete............."COMPLETE" in the summary box.
8. Acknowledge the prompt by pushing the ENT key.
11) Non Garmin Options (For GIA 1 replacement and aircraft equipped
with a DME only)
1. Scroll the curser to the ITEM window highlight King Air – DME Option and press the ENT
key on PFD1.
2. Press the CLR ALL softkey.
3. Scroll the curser to GIA 1 configuration box, and press the ENT key to check the box.
4. Press "Load" softkey.
5. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete............."COMPLETE" in the summary box.
6. Acknowledge the prompt by pushing the ENT key.
11) Non Garmin Options (For GIA 2 replacement and aircraft equipped
with a non-Garmin radar altimeter only)
1. Scroll the curser to the ITEM window highlight King Air – RAD ALT Option (429
Interface) and press the ENT key on PFD1.
2. Press the CHK ALL softkey.
3. Press "Load" softkey.
4. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete............."COMPLETE" in the summary box.
5. Acknowledge the prompt by pushing the ENT key.
11) Non Garmin Options (For GIA 1 or GIA 2 replacement and aircraft
equipped with a non-Garmin TCAS II system only)
1. Scroll the curser to the ITEM window highlight King Air – Non-Garmin TCAS II System
Option and press the ENT key on PFD1.
2. Press the CLR ALL softkey.
3. Scroll the curser to GIA 1 or GIA 2 configuration box, whichever was replaced, and press
the ENT key to check the box.
4. Press "Load" softkey.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Page 274
Revision 1