Garmin G1000 Nxi System Maintenance Manual page 92

•
"Upload Complete.............COMPLETE" in the summary box.
Press the ENT key to acknowledge the "Upload Complete" box.
Open PFD1 circuit breaker and remove the TAWS-B enablement card.
TAWS-A Enablement
Follow this procedure to enable the TAWS Class A feature.
Ensure that the King Air - TAWS-A Support Configuration file has
been loaded per Section 3.8.11 and that a Radar Altimeter Option
(King Air - GRA 5500 Radar Altimeter or King Air - RAD ALT Option
(429 Interface)) Configuration file has been loaded.
Insert the TAWS-A Enablement card in the top slot of PFD1, power on PFD1 in
configuration mode.
On PFD1, select the "System Upload" page using the small FMS knob.
Push in the FMS knob to activate the curser in the Group field. Rotate the small FMS
knob to highlight "Configuration Files" and press the ENT key to select it.
In the ITEM window, rotate the small FMS knob to highlight "Enable TAWS-A" and
press the ENT key to select it.
Press the Load softkey.
Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration column for each item loaded.
•
"Upload Complete.............COMPLETE" in the summary box.
Press the ENT key to acknowledge the "Upload Complete" box.
Open PFD1 circuit breaker and remove TAWS-A enablement card.
Synthetic Vision System Enablement
Follow this procedure to enable the Synthetic Vision feature.
Insert the SVS Enablement card in the top slot of PFD1, power on PFD1 in configuration
mode.
On PFD1, select the "System Upload" page using the small FMS knob.
Push in the FMS knob to activate the curser in the Group field. Rotate the small FMS
knob to highlight "Configuration Files" and press the ENT key to select it.
In the ITEM window, rotate the small FMS knob to highlight "Enable SVS Dual PFD"
and press the ENT key to select it.
Press the Load softkey.
Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration column for each item loaded.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
NOTES
Page 79
Revision 1