Replacing An M120 Dc Power Supply Cable; Figure 101: Connecting Power Cables To The M120 Dc Power Supply - Juniper M120 Hardware Manual

See Also
Related
Documentation

Replacing an M120 DC Power Supply Cable

Copyright © 2018, Juniper Networks, Inc.

Figure 101: Connecting Power Cables to the M120 DC Power Supply

M120 DC Power Supply Description on page 72
Electrical Specifications for the M120 DC Power Supply on page 100
Maintaining the M120 Power Supplies on page 277
Removing an M120 DC Power Supply on page 245
M120 DC Power Supply Description on page 72
Electrical Specifications for the M120 DC Power Supply on page 100
Maintaining the M120 Power Supplies on page 277
To replace a power cable for a DC power supply:
Locate a replacement power cable that meets the specifications defined in
1.
Power, Connection, and Cable Specifications" on page
CAUTION: A licensed electrician must attach a cable lug to the power
cable that you supply. A cable with an incorrectly attached lug can damage
the router (for example, by causing a short circuit).
Make sure that the voltage across the DC power source cable leads is 0 V and that
2.
there is no chance that the cables might become active during the removal process.
Chapter 28: Replacing Power System Components
97.
"M120 DC
251