Replacing An Mx5, Mx10, Mx40, And Mx80 Dc Power Supply Cable; Disconnecting An Mx5, Mx10, Mx40, And Mx80 Dc Power Supply; Figure 54: Installing A Dc Power Supply; Figure 55: Connecting The Dc Power Cables - Juniper MX5 Hardware Manual

MX5, MX10, MX40, and MX80 Universal Routing Platforms Hardware Guide

Replacing an MX5, MX10, MX40, and MX80 DC Power Supply Cable

122
NOTE: The circuit breaker may bounce back to the off (
move the breaker too quickly.
NOTE: If more than one power supply is being installed, turn on all power
supplies at the same time.

Figure 54: Installing a DC Power Supply

Figure 55: Connecting the DC Power Cables

Disconnecting an MX5, MX10, MX40, and MX80 DC Power Supply Cable on page 123
Connecting an MX5, MX10, MX40, and MX80 DC Power Supply Cable on page 124
) position if you
O
Copyright © 2019, Juniper Networks, Inc.