Table of Contents
Advertisement
Programmable Flash Rates
Description
The Incoming Intercom Ringing flash rate is the rate an Incoming DSS
button flashes if you have a DSS appearance for the calling station. This
flash rate can be programmed to 29 different options identified in the
flash rate table. This enables the programmer to customize the key
system configuration to desired flash rates.
By default, the Incoming Intercom Ringing flash rate is set for
Red 120 ipm Flutter (11).
Call Forward Button
Programming Steps
1. Press the CALL FORWARD BTN flex button (FLASH 07, Button #3).
2. Enter a valid number (00-28) on the dial pad to correspond to one of
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The Call Forward Button flash rate is the rate at which the Call Forward
button flashes when any type of forward mode is used. This flash rate can
be programmed to 29 different options identified in the flash rate table.
This enables the programmer to customize the key system configuration
to desired flash rates. By default, Call Forward Button flash rate is set for a
Red Steady On (01).
The following message displays:
CAL L F OR WAR D BT N
R ED S TEA DY ON
the 29 available options. (Refer to
display updates.
0 0-2 8
Table 2-6: Flash
Rates.)
2-47
Advertisement
Table of Contents
