Table of Contents
Advertisement
2-40
LCR Call Progress
Programming Steps
1. Press the LCR CALL PROGRESS flex button (FLASH 06, Button #9).
2. Enter a 0 or 1 on the dial pad to enable/disable the use of this feature.
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
The LCR CALL PROGRESS Feature enables the installer to select, on a
system-wide basis, whether users hear call progress indications. By
default, the LCR Call Progress feature is enabled.
One-Touch Recording Warning Tone
Programming Steps
1. Press the ONE-TOUCH RCD WARNING TONE flex button (FLASH 06,
2. Enter a 0 or 1 on the dial pad to enable/disable the use of this feature.
3. Press HOLD to save the entry. A confirmation tone is heard.
The following message displays:
LCR CA LL PR OG RE SS
EN AB LE D
[0] = Disabled
[1] = Enabled
If this feature is disabled, a confirmation tone is given after the last
digit is dialed. The user does not hear the line being seized or the
outpulsing of digits to the Central Office.
Button #10). The following message displays:
R ECOR DO NG WAR N TON E
EN AB LE D
[0] = Disabled
[1] = Enabled
System Features 2 Programming
0- 1
0- 1
Advertisement
Table of Contents
