Table of Contents
Advertisement
ISDN Programming - Page A
Description
0 disables the leading 011 from being sent to the CO when users dial
international numbers. 1 enables the leading 011 to be sent to the CO on
international numbers. If enabled, and the user does not dial a 011, the
011 will automatically be applied. Default = Enabled
7/8 Digit Number Plan
Programming Steps
1. Press the 7/8 DIGIT NUMBER PLAN flexible button (FLASH 45,
2. Enter a 0 or 1 on the dial pad to select the desired Number Plan.
3. Press the HOLD button. A confirmation tone is heard and the display
Description
Default = ITU (ISDN plan)
Nortel DMS 100 Only
1. Change Flash 45, button 10 (Numbering Plan) to CO by dialing 1
2. Set the definition in the DMS 100 Central Office Switch.
Page A, Button #10).
7/ 8 D GT N U MB ER PL AN
ITU
[0] = Selects ITU number plan
[1] = Selects CO number plan
updates.
When connecting a PRI to a Nortel DMS 100, enter a 1 for the number
plan.
HOLD.
The DMS 100 Office refers to this switch as National or N12
Standard so they know not to look at this parameter in their
switch.
LTDEF should be set to NI PRI N12 V1.
0- 1
3-57
Advertisement
Table of Contents
