System Features 2 Programming
External Day Ring
Programming Steps
1. Press the EXT DAY RINGING flex button (FLASH 06, Button #5). The
2. Enter a 0 or 1 on the dial pad to enable/disable External Day Ring.
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
The system can be programmed so CO lines marked for UDA provides
ringing out of the external page ports when the system is in the Day
Mode. By default, External Day Ringing is disabled.
Overflow Station Forward
Programming Steps
1. Press the ACD/UCD OVERFLOW STA FWD flex button (FLASH 06,
2. Enter a 0 or 1 on the dial pad to enable/disable the use of this feature.
3. Press HOLD to save the entry. A confirmation tone is heard.
following message displays:
EXT ER N AL D AY R IN G
D ISA BLE D
[0] = Disabled
[1] = Enabled
Button #6). The following message displays:
OV ER FLOW S TA FW D
D ISA BLE D
[0] = Disabled
[1] = Enabled
0- 1
0- 1
2-37