Call Coverage Ring Timer - Vodavi STARPLUS Triad 1 System Programming Manual

2-20
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The Attendant Display Timer modifies the way in which multiple calls
ringing at the attendant station display. Currently, if two calls are ringing
at an attendant station, when the station goes off hook, the first call is
answered. The LCD updates to show the second call that is ringing which
sometimes does not allow the station to view the current call's LCD
information. This timer keeps the current call's information on the LCD
for the set time period, then shows any other calls ringing in at the time.
By default, the Attendant Display Timer is set for 1 second and is variable
from 00-99 seconds.

Call Coverage Ring Timer

Programming Steps
1. Press the CALL CVRG RING TIMER flex button (FLASH 02, Button #3).
2. Enter a valid number on the dial pad that corresponds to
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
A Call Coverage Ring Timer enables the user to place another station
under a flex button. When that station rings with an internal or external
call, the DSS button for that station rings or flashes.
By default, the Call Coverage Ring Timer is set for 5 seconds and is
variable from 00-99 seconds. A value of 00 results in the LED flashing but
the call coverage station does not ring.
display updates.
The following message displays:
CAL L COV E RA GE RIN G
05
00-99 seconds.
display updates.
Additional System Timers
0 0-9 9