Table of Contents
Advertisement
ICLID Features
Name in Display
Programming Steps
1. Press the NAME flexible button (FLASH 56, Button #2) to determine
2. Enter a 0 or 1 on the dial pad.
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
The system can be set to display the incoming telephone number or the
person's name on the LCD display. By default, the system shows the
telephone number on the LCD display.
Baud Rate Display
Programming Steps
The ICLID baud rate is programmed using FLASH 15 Baud Rate
assignments. The LCD displays the current baud rate based on which
number is assigned to the ICLID Port number.
Description
The
on the optional MISU. The baud rate is displayed as 150, 300, 600, 1200,
2400, 4800, or 9600 baud. The default is 9600 baud.
whether the name shows in the LCD display instead of the incoming
telephone number.
[0] = Telephone number in display
[1] = Name in display
When FLASH 56, Button #3 is pressed, an error tone is received.
Triad 1/2/3
System can provide ICLID input on the standard RS-232C
5-7
Advertisement
Table of Contents
