Table of Contents
Advertisement
Page A Introduction
DISA Programming
Programming Steps
1. Press the DISA flexible button (FLASH 40, Page A, Button #7).
2. Enter a valid number (0-5) on the dial pad to indicate type of DISA
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
Each CO can be assigned as a DISA line using 1 of the 5 DISA types
available.
desired.
[0] = No DISA
[1] = 24-Hour DISA
[2] = Night DISA
[3] = 24-Hour DISA with forwarding
[4] = Night DISA with forwarding
[5] = Telecenter 24-Hour DISA with forwarding
D ISA T Y PE
N ON E
display updates.
DISA can be programmed using Range programming.
DISA callers are subject to the Class of Service placed on the line
accessed for out dialing.
The system administrator can control the call duration after
establishing a Trunk-to-Trunk call.
After expiration of the Conference Timer, a tone is presented to both
DISA parties, then one minute later the system automatically releases
both trunks.
The Conference Timer does not affect or control a DISA-to-Station
call. By default, there are no outside lines assigned as DISA lines.
0- 5
3-9
Advertisement
Table of Contents
