Additional System Timers
Inter-Digit Time-Out
Programming Steps
1. Press the INTER-DIGIT TIMEOUT flex button (FLASH 01, Button #20).
2. Enter a valid number on the dial pad that corresponds to
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The Inter-Digit Time-Out feature provides inter-digit time-out
programming on a system-wide basis and applies to intercom and LCR
calls. DISA, DID. TIE inter-digit time-outs remain unaffected by this timer.
By default, the Inter-Digit Time-out is set for 5 seconds, and is variable
from 1–99 seconds.
Additional System Timers
Programming Steps
If the system is in the programming mode, continue using the program
codes. If starting to program here, enter the programming mode.
The following message displays:
IN TER D IG IT T / O
05
01-99 seconds in 1 second increments.
display updates.
Press FLASH and dial [02]. The following message displays:
SY ST EM TIMER S
EN TE R B U TTON N UM BE R
0 1-9 9
2-17