Table of Contents
Advertisement
7-8
UCD Ring Timer
Programming Steps
1. Press the RING TIMER flexible button (FLASH 61, Button #1). The
2. Enter a valid number on the dial pad which corresponds to
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The UCD Ring Timer determines how long a call rings into a busy UCD
group before being presented to the first recorded announcement. By
default, the UCD Ring Timer is set for 60 seconds, and is variable from
000–300 seconds.
UCD Message Interval Timer
Programming Steps
1. Press the MIT TIMER flexible button (FLASH 61, Button #2). The
2. Enter a valid number on the dial pad which corresponds to
3. Press HOLD to save the entry. A confirmation tone is heard and the
following message displays:
R ING
06 0
000-300 seconds.
display updates.
A RAN Table must be specified in UCD programming. If a RAN Table is
NOT specified, incoming CO callers are not answered but continue to
receive ringback.
following message displays:
MES SAG E IN TER VA L
06 0
000-600 seconds.
display updates.
The UCD Ring and Message Interval Timers only apply when RAN
ports are specified. If RAN ports are not specified, incoming callers
continue to receive a ringback tone.
0 00- 30 0
0 00- 60 0
UCD Timers
Advertisement
Table of Contents
