Table of Contents
Advertisement
Initialization
Initialization
The system has been pre-programmed with certain features called
default data (refer to
loaded into memory when the system is initialized.
Use the following procedures to return the system database to default
values:
1. Place Switch #8 on the MPB in the ON position.
2. Turn the power off and on to initialize the system database to the
3. Once database is initialized, place Switch #8 in the OFF position to
Database Programming Worksheets
Before attempting programming, it is strongly recommended that
customer database worksheets be prepared (Refer to Appendix C in the
Product Description Manual). These worksheets should become part of
the permanent record of customer programming. Refer to the following
sections when preparing the worksheets.
Database Upload/Download Routine
The Database Upload/Download Routine (FLASH 86) provides a
maintenance facility which permits the user to download the database to
a PC, when a software change is made or when the system needs to be
initialized and reprogrammed. The Upload/Download Routine facilitates
the programming of a database on an in-house system which is
downloaded to a PC and then uploaded to a system in the field.
Table 1-1: Feature Default
The system should be initialized when installed or at any time the
database has been corrupted.
default.
protect the database.
Values). These features are
1-23
Advertisement
Table of Contents
