Table of Contents
Advertisement
2-32
Call Qualifier Tone
Programming Steps
1. Press the CALL QUAL TONE flex button (FLASH 05, Button #13).
2. Enter a 0 or 1 that corresponds with the following entries:
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
The Call Qualifier Tone feature is associated with the ACD Call Qualifier
code and determines if a confirmation tone is heard after the ACD Call
Qualifier code is dialed. If programmed, a confirmation tone is heard.
This feature allows:
By default, the Call Qualification Confirmation tone is disabled.
System Features 2 Programming
Programming Steps
If the system is in the programming mode, continue using the program
codes. If starting to program here, enter the programming mode.
[0] = Disabled
[1] = Enabled
CAL L QU ALIF IER TO NE
D ISA BLE D
Up to four digits for the ACD SMDR reporting functions that are
compatible with the Basic ACD software package.
Entry of up to twelve digits.
Press FLASH and dial [06]. The following message displays:
SY ST EM FEATU R ES 2
EN TE R B U TTON N UM BE R
System Features 2 Programming
0- 1
Advertisement
Table of Contents
