System Timers
Description
The Pause Timer determines the length of the pause when programmed
for use with speed dialing and LCR Insert Tables. By default, the Pause
Timer is set at 2 seconds and is variable from 1–9 seconds. There is no 0
entry. Using this feature may affect Centrex transfers.
Call Park Recall Timer
Programming Steps
1. Press the CALL PARK RECALL TIMER flex button (FLASH 01,
2. Enter a valid number on the dial pad that corresponds to
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The Call Park Recall Timer determines the time before a call placed in a
Call Park location recalls the station placing the call in park. If unanswered
by that station, the call recalls the attendant.
By default, the Call Park Recall Timer is set at 180 seconds and is variable
from 000–600 seconds. A 000 entry disables the timer and there is no
recall.
Button #8). The following message displays:
CAL L PAR K TIMER
18 0
001-600 seconds.
display updates.
0 00- 60 0
2-9