Table of Contents
Advertisement
Hunt Groups
Description
The Hunt Group feature is used to add and delete stations from a
specified Hunt Group.
Station / Pilot / Pilot Ring All -- Hunting Assignments
Programming Steps
1. Press the STATION/PILOT flex button (FLASH 30, Button #13) to
2. Dial a valid number (0-2):
Description
Pilot Hunting -- Incoming CO, transferred CO, and intercom calls can be
directed to a pilot number of a hunt group. The system searches
sequentially (in the order the extensions were entered in the database
programming) for an idle station in the group and rings that station. Calls
directly to stations (by calling the extension number) within the hunt
group do not hunt but receive call progress tones from the extension.
Pilot All Ring Hunting -- rings all idle stations in a particular Hunt group
at one time.
Station (Circular) Hunting -- Transferred CO, and intercom calls that are
presented to a busy, or DND station, that are members of a Station Hunt
Group, search sequentially (in the order the extensions were entered in
database programming) for an idle station in the group and rings that
station. Direct ringing CO Line calls to the station number ring at the
station. If station hunting is desired on a direct ringing call, program the
station hunting pilot number in the CO Line ring assignment list. This lets
the member of the hunt group to receive private/hunt group calls.
indicate Pilot, Pilot Ring All Hunting, or Station Hunting.
[0] = Pilot (Default; shown on LCD as PLT ONE)
[1] = Pilot Ring All Hunting (shown on LCD as PLT ALL)
[2] = Station Hunting (shown on LCD as CIR)
458-461 are ONLY for RAN applications.
"All Ring" hunt groups cannot be chained together.
2-85
Advertisement
Table of Contents
