2-50
Auto Callback - DSS / BLF
Programming Steps
1. Press the AUTO CBCK – DSS/BLF flex button (FLASH 07, Button #7).
2. Enter a valid number (00-28) on the dial pad to correspond to one of
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The Auto Callback DSS/BLF flash rate is the rate at which a DSS button of
a station returning your call back flashes. This flash rate can be
programmed to 29 different options identified in the flash rate table. This
enables the programmer to customize the key system configuration to
desired flash rates. By default, Auto Callback DSS/BLF flash rate is set for a
Red 120 ipm Flash (10).
UCD Available / Unavailable - DSS / BLF
Programming Steps
1. Press the UCD UNAVL – DSS/BLF flex button (FLASH 07, Button #8).
2. Enter a valid number (00-28) on the dial pad to correspond to one of
3. Press HOLD to save the entry. A confirmation tone is heard and the
The following message displays:
AU TO C BCK D SS / B LF
R ED 1 20 IPM FLA SH
the 29 available options. (Refer to
display updates.
The following message displays:
U CD U N AV L D SS / B LF
R ED 6 0 IP M D B L WIN K
the 29 available options. (Refer to
display updates.
Programmable Flash Rates
0 0-2 8
Table 2-6: Flash
Rates.)
0 0-2 8
Table 2-6: Flash
Rates.)