Table of Contents
Advertisement
3-10
CO Line Group Programming
Programming Steps
1. Press the CO LINE GROUP flexible button (FLASH 40, Page A,
2. Enter a valid number on the dial pad (0-23) which corresponds to
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
Twenty four line groups are available for CO line assignment. Groups
should be assigned according to type (local, FX, WATS, etc.). All
unassigned CO lines should be programmed into a different group so
they are not accessed by Line Queuing, Pooled Group access (Pool
Buttons), Speed Dial, or LCR features.
Line Group 0 is for programming a line(s) as private. CO Lines assigned to
Line Group 0 can only be accessed by stations with a direct CO
appearance (button) on their phone. All unused COs should be placed in
Line Group 0. By default, all lines are placed in Line Group 1.
Button #8).
Groups 0-23.
LIN E GR OU P
1
display updates.
When tying multiple systems together, use the Networking Table
(FLASH 16).
Page A Introduction
0-2 3
Advertisement
Table of Contents
