Table of Contents
Advertisement
Page A Introduction
Line Queuing
Programming Steps
1. Press the QUEUING flexible button (FLASH 50, Page A, Button #7).
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
Stations can be allowed or denied the ability to manually queue for a
busy group of CO lines. Even when disabled, stations have automatic LCR
queuing privileges. By default, CO Line Queuing is enabled at all stations.
Preferred Line Answer
Programming Steps
1. Press the PREF LINE ANSWER flexible button (FLASH 50, Page A,
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
Stations can be given the ability to answer a call by simply going
off-hook. By default, Preferred Line Answer is enabled on all stations.
The following message displays:
LIN E QU EU ING
EN AB LE D
[0] = Disabled
[1] = Enabled
Button #8). The following message displays:
P RE F L INE A N SWE R
EN AB LE D
[0] = Disabled
[1] = Enabled
0- 1
0- 1
4-9
Advertisement
Table of Contents
