Table of Contents
Advertisement
2-36
Description
The Verified Account Code/Traveling Class of Service (COS) feature
provides tracking of specific calls by entering a verified, variable length
(up to 12-digits) identifier. Each account code can be assigned a day and
night Class-of-Service for determining the dialing privileges allowed by
that account code. This lets users override a restricted station. If the
dialed account code matches the Verified Account code table, an
intercom dial tone is returned, otherwise an error tone is returned. SMDR
must be enabled for the account code to print as part of the SMDR
record.
in at FLASH 31. By default, the Verified Account Codes feature is disabled.
Call Forward Display
Programming Steps
1. Press the CALL FWD DISPLAY STATUS flex button (FLASH 06,
2. Enter a 0 or 1 on the dial pad to enable/disable Call Forward Display.
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
When call forwarding is invoked, the LCD display normally indicates the
call forwarding mode at all times.
This feature is enabled/disabled in administrative programming on a
system-wide basis. By default, Call Forward Display is enabled.
Triad 1/2/3
allows up to 250 12-digit account codes programmed
Button #4). The following message displays:
CAL L F WD DIS P LAY
EN AB LE D
[0] = Disabled
[1] = Enabled
System Features 2 Programming
0- 1
Advertisement
Table of Contents
