Restart Request Timer; T-1 Alarm Programming - Vodavi STARPLUS Triad 1 System Programming Manual

T-1 Alarm Programming

Restart Request Timer

Programming Steps
1. Press the RESTART REQ TIMER flexible button (FLASH 45, Page B,
2. Enter a valid number (0-200 seconds) on the dial pad.
3. Press the HOLD button. A confirmation tone is heard and the display
T-1 Alarm Programming
Programming Steps
If the system is in the programming mode, continue using the program
codes. If starting to program here, enter the programming mode.
1. Press FLASH and dial [47]. The following message displays:
2. Press a button (1-7) that represents the desired alarm setting.
Button #17).
R ESTAR T R EQ TIME R
T3 16
updates.
T1 A LAR M
EN TE R B U TTON N UM BE R
These settings govern all T-1 Trunk cards installed in the system.
The LED lights steady when the button is pressed.
Once the desired alarm is selected, the following conditions can
be programmed:
Button #12 = Clears the alarm
Button #13 = Minor threshold setting
Button #14 = Major threshold setting
Button #15 = Time period for Minor/Major alarms
Button #16 = Sends LCD message of Major alarms to first
120
Attendant Station
0 -20 0
3-67