3-56
Leading 1
Programming Steps
1. Press the LEADING 1 flexible button (FLASH 45, Page A, Button #8).
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
3. Press the HOLD button. A confirmation tone is heard and the display
Description
0 disables the leading 1 from being sent to the CO when users dial
national long distance numbers. 1 enables the leading 1 to be sent to the
CO on national long distance numbers. If enabled, and the user does not
dial a 1, the 1 will automatically be applied. Default = Enabled
Leading 011
Programming Steps
1. Press the LEADING 011 flexible button (FLASH 45, Page A,
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
3. Press the HOLD button. A confirmation tone is heard and the display
LEA D ING 1
EN AB LE D
[0] = Disabled
[1] = Enabled
updates.
Button #9).
LEA D ING 01 1
EN AB LE D
[0] = Disabled
[1] = Enabled
updates.
ISDN Programming - Page A
0- 1
0- 1