Table of Contents
Advertisement
Additional System Timers
Modem Answer Timer
Programming Steps
1. Press the MODEM ANSWER TIMER flex button (FLASH 02,
2. Enter a valid number on the dial pad that corresponds to
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The Modem Answer Timer determines how long the On Board modem
provides a carrier tone to a distant modem. If a connection is not made at
the end of this timer, the On Board modem hangs up.
By default, the Modem Answer Timer is set for 25 seconds and is variable
from 25-999 seconds.
Pulse Dial Inter-Digit Timer
Programming Steps
1. Press the PULSE DIAL I/D TIMER flex button (FLASH 02, Button #5).
2. Enter a valid number on the dial pad that corresponds to 300-600 ms.
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
This governs the inter-digit time of the Pulse Dial Digits, rotary dial mode.
By default, the Pulse Dial Ring Timer is set for 300 ms and is variable from
300-600 ms.
Button #4). The following message displays:
MOD EM A NS WE R T/ O
25
025-999 seconds.
display updates.
The following message displays:
IN T D IG IT PU LS E
30 0
display updates.
0 25- 99 9
3 00- 60 0
2-21
Advertisement
Table of Contents
