Table of Contents
Advertisement
Programmable Flash Rates
Description
The UCD Available/Unavailable DSS/BLF flash rate is the rate at which a
DSS appearance for a station in ACD/UCD Unavailable mode flashes. This
flash rate can be programmed to 29 different options identified in the
flash rate table. This enables the programmer to customize the key
system configuration to desired flash rates. By default, UCD
Available/Unavailable DSS/BLF flash rate is set for a Red 60 ipm Double
Wink (04).
Transfer CO Ringing
Programming Steps
1. Press the TRANSFER CO RING flex button (FLASH 07, Button #9). The
2. Enter a valid number (00-28) on the dial pad to correspond to one of
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The Transfer CO Ringing flash rate is the rate at which a CO Line button or
Loop button flashes when a call is transferred to you. This flash rate can
be programmed to 29 different options identified in the flash rate table.
This enables the programmer to customize the key system configuration
to desired flash rates. By default, Transfer CO Ringing flash rate is set for a
Red 120 ipm Flash (10).
following message displays:
TR AN S FER CO R IN G
R ED 1 20 IPM FLA SH
the 29 available options. (Refer to
display updates.
0 0-2 8
Table 2-6: Flash
Rates.)
2-51
Advertisement
Table of Contents
