Table of Contents
Advertisement
Database Upload/Download Routine
HYPER TERMINAL -- Downloading a Database File
After opening Hyper Terminal, and the New Connection screen displays,
complete the following steps:
1. Type connection name and select appropriate icon, then click <OK>.
2. When the Phone Number screen displays, change the setting in the
3. Once the COM1 Properties screen displays, change the settings as
4. Press <Enter> and complete the following fields:
5. On the tool bar, click <Transfer> and select Receive File.
6. Change Receive Protocol setting to XMODEM, and click <Receive>.
7. Type database filename and click <OK>. The Adm> prompt displays
Connect Using box to: Direct to COM1, and then click <OK>.
shown, and then click <OK>.
Baud Rate = 9600
Parity = None
Data Bits = 8
Stop Bits = 1
Flow Control = Xon/Xoff
Screen Fields
ENTER PASSWORD:
ADM>,
ADM>86
ADM>W
ADM>
when the file transfer is complete.
Type password: XXXXVODAVI
(XXXX = default password for online administration)
Type program number.
Load database routine.
Type button number.
Download database.
Press HOLD button.
Press <Enter> key twice.
Action
1-31
Advertisement
Table of Contents
