3-54
Framing
Programming Steps
1. Press the FRAMING flexible button (FLASH 45, Page A, Button #3).
2. To view a Framing setting, enter a valid number (0-2).
Description
Changes to the Framing area are not possible at this time (setting = ESF).
NT / TE Mode
Programming Steps
1. Press the NT/TE MODE flexible button (FLASH 45, Page A,
2. To view an NT/TE setting, enter a valid number (0-1).
Description
The TE Mode setting cannot be changed.
Power
Programming Steps
1. Press the POWER flexible button (FLASH 45, Page A, Button #5).
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
FR AMIN G
ESF
Button #4).
N T / TE MOD E
TE
P OWER
D ISA BLE D
[0] = Disabled
[1] = Enabled
ISDN Programming - Page A
0- 2
0- 1
0- 1