Table of Contents
Advertisement
3-50
Name Assigned to DID Number
Programming Steps
1. Press the NAME flexible button (FLASH 44, Button #3) to enter the
2. Press the HOLD button to update the database. A confirmation tone
3. Use the BACK SPACE flexible button (FLASH 44, Button #5) to erase
DID Name and Number Codes
Erasing a DID Table Entry
Programming Steps
Clearing Entries from DID Table
1. Press the CLEAR ENTRY Button (FLASH 44, Button #4) to clear an
2. Press the HOLD button to save the entry. A confirmation tone is
desired name for the DID trunk. Maximum length is 8-characters.
is heard.
the current letter to correct for errors.
The display shows the DID name or number as it is entered.
Figure 3-1: DID Name/Number Codes
entire Phone Number, Name and Route from the DID Table.
heard.
Direct Inward Dialing (DID) Programming
Other Codes
1 = 1#
8 = 8#
2 = 2#
9 = 9#
3 = 3#
0 = 0#
4 = 4#
Space = 11
5 = 5#
: = 12
6 = 6#
- = 13
7 = 7#
' = 14
" = 01
* = *#
, = 02
( = #1
? = 03
) = #2
/ = 04
+ = #3
! = *1
= = #4
$ = *2
# = ##
& = *4
. = 24
Advertisement
Table of Contents
