Table of Contents
Advertisement
2-14
SLT Hook Flash Debounce Timer
Programming Steps
1. Press the SLT HOOK FLASH DEBOUNCE TIMER flex button (FLASH 01,
2. Enter a valid number on the dial pad that corresponds to 0-1 seconds
3. Press HOLD to save the entry. A confirmation tone is heard and the
Description
The SLT Hook Flash Debounce Timer determines the time needed to
determine a valid on-hook or off-hook condition for single line
telephones. On-Hook or Off-Hook signals that are shorter in duration
than this timer are ignored by the system. Refer to
By default, the SLT Hook Flash Debounce Timer is set to 0.30 seconds and
is variable from 0-1 seconds in 10 ms increments. This is a 3-digit entry
where 010 equals 0.1 seconds.
0
Button #15). The following message displays:
H OOK SW T B OU N CE
03 0
in 10 ms increments.
display updates.
HOOK-F LASH
.1
.2
.3
.4
Figure 2-1: Hook Switch Activity
0 00- 10 0
Valid
.5
.6
.7
.8
TIME
(in seconds)
System Timers
Figure 2-1
.
Valid
ON-HOOK
.9
1.0
1.5
2.0
Advertisement
Table of Contents
