Installing The Front Trim; Removing The Rear Fender - KTM 450 SX ATV Owner's Manual

MAINTENANCE ON CHASSIS AND ENGINE

Installing the front trim

9.69

Removing the rear fender

9.70
–
Connect the plug-in connector of the emergency OFF switch with the rip cord and posi-
tion the front trim.
–
Mount all screws.
–
Fully tighten screws
Guideline
Screw on fuel tank
–
Fully tighten screws
Guideline
Remaining screws, chassis
–
Install the front cover. (
301820-11
–
Remove the seat (
.

M6
.

M6
p. 123)
p. 119)
125
6 Nm (4.4 lbf ft)
10 Nm (7.4 lbf ft)