04/SHOCK ABSORBER, SWINGARM
Rear shock absorber - installing the heim joint
8.36
Info
The operations are the same on the top and bottom heim joint.
Rear shock absorber - assembling the seal ring retainer
8.37
–
Position the new heim joint
Pressing tool (T1206) (
–
Press the heim joint all the way in.
201088-10
–
Press the heim joint against the lock ring using the special tool.
Pressing tool (T1207S) (
–
Mount the second lock ring
201086-11
–
Mount seal rings
201085-11
–
Position and press in both collar bushings
201089-10
–
Mount dust boot
Mounting sleeve (T1204) (
–
Lubricate the sealing lip of the dust boot.
Lubricant (T625) (
200792-10
and the special tool.
p. 238)
p. 238)
.
on both sides.
.
with the special tool.
p. 237)
p. 225)
50