04/SHOCK ABSORBER, SWINGARM
Front shock absorber - removing the heim joint
8.14
Info
The operations are the same on the top and bottom heim joint.
Front shock absorber - installing the heim joint
8.15
Info
The operations are the same on the top and bottom heim joint.
Condition
The shock absorber has been removed.
–
Clamp the shock absorber in a vise using soft jaws.
–
Remove both collar bushings
Pin (T120) (
200906-10
–
Remove seal rings
200907-10
–
Press heim joint
Pressing tool (T1207S) (
The heim joint is lined up with a lock ring.
–
Remove the other lock ring
200908-10
–
Place special tool
Pressing tool (T1207S) (
200909-10
of the heim joint.
p. 237)
on both sides.
to the side.
p. 238)
.
underneath and press out the heim joint using special tool
p. 238)
31
.