TUNING THE ENGINE
Carburetor - adjusting idle
15.3
–
Move the handlebar to the straight-ahead position.
–
Loosen the nut
Guideline
Play in throttle cable
–
Tighten nut
302877-10
x
–
Screw in the idle adjusting screw
ting.
Guideline
Idle mixture adjusting screw
Open
Adjustment tool for mixture control screw (59029034000)
–
Run the engine until warm.
Guideline
600145-10
Warm-up time
–
Adjust the idle speed with the adjusting screw
Guideline
Choke function deactivated – The choke lever is pushed in to the stop. (
Idle speed
and use the screw
to adjust the play in the throttle cable
.
until it stops and then to the prescribed basic set-
3... 5 mm (0.12... 0.2 in)
1.0 turn
≥ 5 min
.
1,500... 1,600 rpm
167
.
p. 43)