Replace Cooling Fans; Replace The Cooling Fan - Omron Q2V Series Technical Manual

8.4 Replace Cooling Fans

8.4

Replace Cooling Fans

NOTICE: Use the instructions in this manual to replace the cooling fans. When you do maintenance on the fans, replace all the
fans to increase product life. If you install the fans incorrectly, it can cause damage to the drive.
To replace a cooling fan, contact the manufacturer or your nearest sales representative.
◆

Replace the Cooling Fan

DANGER! Electrical Shock Hazard. Do not examine, connect, or disconnect wiring on an energized drive. Before servicing,
disconnect all power to the equipment and wait for the time specified on the warning label at a minimum. The internal capacitor
stays charged after the drive is de-energized. The charge indicator LED extinguishes when the DC bus voltage decreases
below 50 Vdc. When all indicators are OFF, measure for dangerous voltages to make sure that the drive is safe. If you do work
on the drive when it is energized, it will cause serious injury or death from electrical shock. The drive has internal capacitors that
stay charged after you de-energize the drive.
CAUTION! Burn Hazard. Do not touch a hot drive heatsink. De-energize the drive, wait for a minimum of 15 minutes, then make
sure that the heatsink is cool before you replace the cooling fans. If you touch a hot drive heatsink, it can burn you.
NOTICE: Use the instructions in this manual to replace the cooling fans. When you do maintenance on the fans, replace all the
fans to increase product life. If you install the fans incorrectly, it can cause damage to the drive.
■
Remove a Fan
1.
To remove the fan finger guard from the drive, push the hooks on the left and right sides of it and pull up.
A - Fan finger guard
2.
Pull the cooling fan straight up from the drive. Disconnect the power supply connector and remove the fan
from the drive.
A - Cooling fan
■
Install a Fan
Reverse the removal procedure to install a cooling fan.
274
Table 8.11 Applicable Models
Model
2006 - 2021
2042 - 2082
B010, B012
4005 - 4012
4031 - 4060
Figure 8.1 Remove the Fan Finger Guard
Figure 8.2 Remove the Cooling Fan
Cooling Fans
1
2
1
1
2
SIEPCYEUOQ2V01A Q2V Technical Manual