Omron Q2V Series Technical Manual page 345

No.
Name
(Hex.)
F7-04 IP Address 4
(03E8)
F7-05 Subnet Mask 1
(03E9)
F7-06 Subnet Mask 2
(03EA)
F7-07 Subnet Mask 3
(03EB)
F7-08 Subnet Mask 4
(03EC)
F7-09 Gateway Addr 1
(03ED)
F7-10 Gateway Addr 2
(03EE)
F7-11 Gateway Addr 3
(03EF)
F7-12 Gateway Addr 4
(03F0)
F7-13 Addr Mode@Startup
(03F1)
F7-14 Duplex Mode Selection
(03F2)
SIEPCYEUOQ2V01A Q2V Technical Manual
Description
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the fourth octet of the IP Address for the device that is connecting to the network.
Restart the drive after you change this parameter.
Note:
When F7-13 = 0 [Addr Mode@Startup = Static]:
• Use parameters F7-01 to F7-04 to set the IP Address. Be sure to set a different IP
address for each drive on the network.
• Also set parameters F7-01 to F7-12.
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the first octet of the subnet mask of the connected network.
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets the second octet of the subnet mask of the connected network.
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the third octet of the subnet mask of the connected network.
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets the fourth octet of the subnet mask of the connected network.
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets the first octet of the gateway address of the connected network.
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets the second octet of the gateway address of the connected network.
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets the third octet of the gateway address of the connected network.
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the fourth octet of the gateway address of the connected network.
Note:
Set this parameter when F7-13 = 0 [Addr Mode@Startup = Static].
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the method to set option card IP addresses.
0 : Static
1 : BOOTP
2 : DHCP
Note:
• The following setting values are available when using the PROFINET
communication option card (SI-EP3).
–0: Static
–2: DHCP
• When F7-13 = 0, set parameters F7-01 to F7-12 [IP Address 1 to Gateway Addr
4] to set the IP Address. Be sure to set a different IP address for each drive on the
network.
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
Sets the duplex mode setting method.
0 : Half/Half
1 : Auto/Auto
2 : Full/Full
3 : Half/Auto
4 : Half/Full
5 : Auto/Half
6 : Auto/Full
7 : Full/Half
8 : Full/Auto
11.8 F: OPTIONS
Default
Ref.
(Range)
20 560
(0 - 255)
255 560
(0 - 255)
255 560
(0 - 255)
255 560
(0 - 255)
0 560
(0 - 255)
192 560
(0 - 255)
168 560
(0 - 255)
1 561
(0 - 255)
1 561
(0 - 255)
2 561
(0 - 2)
1 561
(0 - 8)
345
11