Omron Q2V Series Technical Manual page 596

12.7 H: TERMINALS
Note:
The terminal will not activate for CPF00 and CPF01 [Control Circuit Error] faults.
■
4: Alarm
Setting Value Function
4 Alarm
■
5: @Run
Setting Value Function
5 @Run
ON : Drive is running
The drive is receiving a Run command or outputting voltage.
OFF : Drive is stopping
Drive is stopped.
■
6: @Reverse
Setting Value Function
6 @Reverse
ON : The motor is operating in the reverse direction.
OFF : The motor is operating in the forward direction or the motor stopped.
■
7: Zero Speed
Setting Value Function
7 Zero Speed
596
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
The terminal turns on when the drive detects a minor fault.
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
The terminal activates when the Run command is input and when the drive is outputting voltage.
Figure 12.76 Drive Running Time Chart
V/f OLV OLV/PM OLV/PM AOLV/PM EZOLV
The terminal activates when the motor operates in the reverse direction.
Figure 12.77 Reverse Operation Output Time Chart
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
The terminal activates when the output frequency is less than the value of E1-09 [Min Output Frequency] or b2-01 [ZSpd/DCI
Threshold].
Description
Description
Description
Description
SIEPCYEUOQ2V01A Q2V Technical Manual