Model Specifications (Single-Phase 200 V Class) - Omron Q2V Series Technical Manual

10.4

Model Specifications (Single-Phase 200 V Class)

Model
Maximum Applicable Motor
Output (kW)
Maximum Applicable Motor
Output (HP)
Rated Input
Input
Current (A)
Rated Output
Capacity (kVA)
*3
Rated Output
Current (A)
Overload Tolerance
Output
Carrier Frequency
Maximum Output Voltage
Maximum Output Frequency
Measures for
AC reactor
Harmonics
Braking Device Braking Transistor
EMC Filter
EMC Filter
IEC61800-3
Rated Voltage/Rated Frequency
Permitted Voltage Fluctuation
Power Supply
Permitted Frequency Fluctuation
Input Power
(kVA)
*1 The maximum applicable motor output complies with 208 V motor ratings as specified in NEC Table 430.250. The rated output
current of the drive output amps must be equal to or more than the motor rated current.
*2 The maximum applicable motor output is based on 4-pole, general-purpose 220 V motor ratings. The rated output current of the drive
output amps must be equal to or more than the motor rated current.
*3 The rated output capacity is calculated with a rated output voltage of 220 V.
SIEPCYEUOQ2V01A Q2V Technical Manual
Table 10.5 Ratings (Single-Phase 200 V Class)
B001 B002
*1
HD 0.1 0.25
0.2
*2
ND 0.37
0.18
*1
HD 1/6 1/4
*2
ND 1/6 1/4
HD 1.4 2.8
ND 2.0 5.0
HD 0.3 0.6
ND 0.5 0.7
HD 0.8 1.6
ND 1.2 1.9
• HD: 150% of the rated output current for 60 seconds. The permitted frequency of overload is once every 10 minutes.
• ND: 110% of the rated output current for 60 seconds. The permitted frequency of overload is once every 10 minutes.
Note:
Derating may be necessary for applications that start and stop frequently.
HD: 10 kHz without derating the drive capacity.
ND: 2 kHz without derating the drive capacity.
Derate the drive capacity to use values to 15 kHz maximum.
Single-phase 200 V to 240 V
Note:
The maximum output voltage is proportional to the input voltage.
• V/f Control, OLVector, PM OLVector: 590 Hz
• PM AOLVector: 270 Hz
• EZ Vector: 120 Hz
External options
Standard internal characteristics
Category C1 (Conducted emission)
• Single-phase AC power supply 200 V to 240 V at 50/60 Hz
• DC power supply 270 V to 340 V
-15% to +10%
±5%
HD 0.4 0.7
ND 0.5 1.3

10.4 Model Specifications (Single-Phase 200 V Class)

B004 B006
0.55 1.1
0.75 1.1
1/2 1
3/4 1.5
5.5 11
7.3 13.8
1.1 1.9
1.3 2.3
3 5
3.5 6
1.5 2.9
1.9 3.6
B010 B012
1.5 2.2
2.2 3.0
2 3
3 3
14.1 20.6
20.2 24.0
3 4.2
3.7 4.6
8 11
9.6 12.2
HD: 8 kHz without derating the drive capacity.
ND: 2 kHz without derating the drive capacity.
Derate the drive capacity to use values to 15 kHz
maximum.
External
External
3.7 5.4
5.3 6.3
B018
4.0
-
5
-
35.0
-
6.7
-
17.6
-
options
options
9.2
-
10
295